1. Traeger Support
  2. Getting Started
  3. Connect & Pair Your WiFIRE Grill

Find Your Grill's Firmware Version

  • Updated

What's in This Article?

You can find your grill's firmware version via the Traeger app or directly on the grill's controller.

Find your grill's latest firmware version here.

How to Find Your Grill's Firmware in the Traeger App

If you've connected your WiFIRE-enabled grill to WiFi and paired it with the Traeger app, you can easily find it's current firmware and config versions in the app.

  1. Open the Traeger app.
  2. Tap the grill icon in the middle of the bottom task bar.
    app_taskbarjpeg.jpeg
  3. If you have multiple grills, select which grill you want.
  4. On your grill's dashboard, tap, Settings.
    Finding Firmware.png
  5. Your firmware version is listed next to FIRMWARE.
    Firmware Version.png

How to Find Your Grill's Firmware on Your Controller

D2 Grills
Wireframe mockup of a D2 grill controller, showing a blank display screen, a knurled control knob, two indicator icons, and a red button below a divider line.
D2 WiFIRE Controller
  1. Select, MENU
  2. Select, SETTINGS
    Finger pressing the menu button to the left of the ignite button on a Traeger D2 WiFIRE controller, with the on-screen menu open and Settings highlighted.
  3. Select, ABOUT GRILL
  4. See the number next to, FIRMWAREAbout Grill screen for a Pro 575 listing SW VER, CONFIG VER, and UUID.
     
Touchscreen Grills
"Wireframe mockup of a touchscreen grill controller, showing a blank display area with two placeholder text lines, two button rows, two dial/indicator icons on the left, and a control knob on the right."
Touchscreen WiFIRE Grill Controller
  1. Go to your grill's Main Menu
    Touchscreen grill controller home screen with the Menu button highlighted in the top-left corner.
  2. Scroll to and select, ABOUT GRILL
    Grill menu list with ABOUT GRILL highlighted, below Maintenance & Care and above Tips & Tricks.
  3. The About Grill page shows the grill's firmware and config versions. About Grill screen listing the grill's UUID, Display version, Software version, and Connectivity version.
     
Westwood Series
Wireframe mockup of a Westwood grill controller with the bottom-right button highlighted in orange, next to a blank display screen.
Westwood Series WiFIRE Grill Controller

Westwood Series grill's firmware version can only be found in the Traeger app. It cannot be viewed on the grill's controller.
 

Woodridge Series
Westwood Series Traeger Pellet Grill Controller with a dot-matrix display, 2 probe jacks, a dial, and an ignite button outlined in orange.
Woodridge Series Controller
  1. Turn on the grill and press and hold the menu button
    Traeger Woodridge controller with an arrow pointing to the Menu button, pressed to access the firmware version.
  2. The current firmware version will be displayed on the screen.
    Firmware Version.png
  3. Tap the menu button again to exit.
     
Previous
Next
4416575371547

Was this article helpful?

168 out of 457 found this helpful