Replacing an Electric Side Burner-Woodridge Elite

What's in This Article?

Applicable SKUs & Grill Compatibility

Elite Side Burner.png

The instructions outlined in this article apply to the following electric side burner SKU on Traeger's Woodridge Elite grill:

  • KIT1001

How to Replace an Electric Side Burner

  1. Turn off and unplug the grill from power. Disconnect the power cord from the side burner.
    Unplug power.jpg
  2. Remove the side burner cover and set aside.
  3. Underneath the shelf assembly, remove the x4 screws (1/4-20 X 1/2") and then lift the side burner out of the side shelf.
    Remove 4 Screws.jpg
  4. Place the new side burner into the side shelf assembly.
  5. Fasten the side burner in place using the x4 screws (1/4-20 X 1/2") the replacement burner came with.
  6. Reconnect the power cord to the side burner.
  7. Place the side burner cover back onto the side burner.
  8. Service complete.
Previous
Next
33056713775771

Was this article helpful?

1 out of 1 found this helpful