Replacing a Woodridge Series Grease Chute

What's in This Article?

Applicable SKUs & Grill Compatibility

The instructions outlined in this article apply to the following grease chute SKUs on Traeger's Woodridge Series grills:

Woodridge Woodridge Pro Woodridge Elite
KIT0940 KIT0979

 

How to Replace a Grease Chute

  1. Turn off and unplug grill from power.
    Turn Off and Unplug Grill.png
  2. Open grill lid.
  3. Remove all grill grates and hang from grate hooks on front and rear of grill.
    Grill Grates Hanging on Hooks.png
  4. Remove drip tray and hang from grate hooks on front and rear of grill.
  5. Take out the ash cap and grease chute and set aside.
    Grease Chute (1).gif
  6. Place new grease chute in grill, making sure it is hooked on the bracket on the left side of the grill.
  7. Place the ash cap back into the grill, making sure it is tabbed into the slot in the grease chute.
  8. Place drip tray and all grates back into the grill.
Previous
Next
31541456844571

Was this article helpful?

0 out of 0 found this helpful