Replacing a Woodridge Series Heat Baffle

What's in This Article?

Applicable SKUs & Grill Compatibility

The instructions outlined in this article apply to the following SKUs on Traeger's Woodridge Series grills:

Woodridge Woodridge Pro Woodridge Elite
KIT0964 KIT0980

 

How to Replace a Heat Baffle

  1. Turn off and unplug the grill from the power source.
    Turn Off and Unplug Grill.png
  2. Open the grill lid and remove all grates from inside the grill.
    • Use the hooks on the front and back of the grill to hang the grates.
      Grill Grates Hanging on Hooks.png
  3. Remove the drip tray.
    • Use the hooks located at the left or right end of the grill to hang the drip tray.
  4. Remove the heat baffle from the grill.
    Remove Heat Baffle.gif
  5. Place the new heat baffle in the grill. Make sure the tab on the baffle is inserted into the slot near the right end of the grill body.
  6. Re-install the drip tray and grates into the grill.
  7. Plug the grill in and turn it on. 
Previous
Next
31542969382299

Was this article helpful?

0 out of 0 found this helpful