Replacing a Motherboard Fuse- Touchscreen Grills

How to replace a motherboard fuse on Touchscreen grills.

Related Articles:

• Hot Rod Service Panel Replacement Instructions - Touchscreen Grills

Applicable SKU

• KIT1035

How to Replace a Motherboard Fuse

Note: New fuses may be a different color than the existing fuses on the motherboard.

1. Ensure grill is off and unplugged.
2. Remove the hopper side service panel by removing 6 screws (2 located on top of the access panel, 2 below the hopper side rail, and 2 on the bottom of the access panel).
   
   • IMPORTANT: In order to proceed, customers will need to remove the hopper service panel. Follow Using a Manual Impact Driver to Access Hopper Interior below before following the replacement instructions steps. 
   • Pro Tip: Some customers find this easier if they remove the P.A.L Rail first.
3. Remove the smart combustion cover.
4. Locate the two fuses on the bottom right corner of the circuit card assembly.
5. Gently remove each one of them.
   

6. Make sure to discard the old fuses so they don't get confused with the new ones.

7. Gently install the new fuses.
   

8. Once the new fuses are installed, gently press on the top to make sure they are fully seated.

9. Reinstall the smart combustion cover

10. Replace and secure the hopper side access panel.