Leg & Wheel Replacements - Touchscreen Ironwoods & Wheel Replacement Timberline

Follow the steps below to replace any leg on the touchscreen Ironwood series. Traeger's replacement legs include:

Applicable Part Numbers

The instructions outlined in this section apply to the following Traeger replacement parts:

Tools Needed

• Allen Key/Wrench
• Wrench 

Replacement Instructions

Replacing the legs on your touchscreen Ironwood and Ironwood XL grill can be done in just a few, simple steps. 

All-Terrain Wheel Legs	Caster Wheel Legs

1. Remove the grill's internal components (grill grates, manifold, drip tray, grease governor, etc.).
2. With the help of another person, carefully lay the grill on its back.
3. Remove nut, bolt and washers that attach leg to the grill body.
4. Detach old leg from grill frame.
5. Insert new leg into grill body. 
6. Affix leg to grill frame with nut, bolt and washers.

Applicable Part Numbers

The instructions outlined in this section apply to the following Traeger replacement parts:

Tools Needed

• Screwdriver

Replacing an All-Terrain Wheel

Follow the steps below to replace your all-terrain wheels.

1. Remove the grill's internal components (grill grates, manifold, drip tray, grease governor, etc.).
2. With the help of another person, carefully lay the grill on its back.
3. Unscrew bolt and remove leg.
4. Set new wheel in place and screw in.
    

Replacing a Caster Wheel

Ironwood

Use the steps below to replace a caster wheel on an Ironwood.

1. Remove the grill's internal components (grill grates, manifold, drip tray, grease governor, etc.).
2. With the help of another person, carefully lay or tip the grill on its back.
3. A screwdriver can be used to remove the caster wheel from the grill leg. 
   • Apply a high amount of pressure to pop the wheel out. They aren't meant to be fall out.
4. Once the wheel is removed, push new caster wheel into the grill leg.

Timberline

Use the Steps below to replace a caster wheel on a Timberline.

Caster wheels are the wheels that attach under the cabinet on the bottom of the Timberline grills. 

Applicable SKUs: KIT0613

1. Remove the grill's internal components (grill grates, manifold, drip tray, grease governor, etc.).
2. With the help of another person, carefully lay the grill on its back.
3. Remove the 4 screws/4 washers from each caster to detach the wheels (16 of each in total).
4. Place the new caster wheels in place and secure in place using 4 screws/4 washers on each caster (16 of each in total).
5. Return the grill to its upright position.