Non-Connected grills have three leg types: Folding Sawhorse, Cabinet Clip-in, and Bolt-on Sawhorse. Select the model matching yours under Replacement Steps for leg replacement instructions.
Legs fold under the grill. Used on: Tailgater styles grills.
Folding Sawhorse Leg Style
Part #:
Description:
KIT0044
Rear Left
KIT0045
Front Left
KIT0046
Rear Right
KIT0047
Front Right
Legs slide into slots with clips/tabs. Used on: Century 22-style grills.
Cabinet Clip-In Style
Part #:
Description:
KIT0551
Hopper Side
KIT0552
Chimney Side
Bolts + nuts + washers (no clips or folding legs). Used on: Pro style grills (Freemont, Mesa 20, Pro 22, Pro 34).
Bolt-on Sawhorse Leg Style
Part #:
Description:
KIT0134
Front Left
KIT0135
Rear Left
KIT0136
Front Right
KIT0137
Rear Right
KIT0139
Rear Right (Pro 34 Only)
KIT0140
Front Right (Pro 34 Only)
Tools Needed (varies by model)
Phillips Screwdriver
Wrench
Pro Tip: Have a second person help you safely handle the grill
Estimated Time to Complete
20-30 minutes (varies by model)
Replacement Steps
Pro Tip:Need More Detail? If you need a reference for a specific model, refer to the grill’s original assembly guide. The leg installation section shows exact hardware placement and orientation.
Important:Before You Start
Make sure the grill is OFF and completely cool
Remove all internal parts (grill grates, drip tray, and heat baffle)
Remove the grease bucket
Place the grill on a flat, stable surface
Have a second person help you safely handle the grill
Gather the tools you’ll need (tools may vary by model)
Keep all screws and hardware unless new ones are included
Folding Sawhorse Style Leg
Used on: Tailgater-style grills
Unplug the Grill.
With the help of another person, carefully lay the grill on its back.
Remove the wheels and axel that holds the right legs together.
Remove screws that holds the leg to the grill body( including knob screws).
Pull leg away from grill.
Attach new leg to the grill body. Start all screws loosely.
Reinstall wheels and axle.
Tighten all hardware securely.
Cabinet Clip Style Leg
Used on: Century 22-style grills
Unplug the Grill.
With the help of another person, carefully lay the grill on its back.
Remove the wheels and axel.
Remove bolts securing leg to grill body.
Remove bottom shelf.
Pull leg out from grill body slots.
Align new leg with grill body slots.
Push legs fully into place.
Install screws loosely first.
Reinstall bottom shelf.
Reinstall wheels and axle.
Tighten screws fully.
Bolt-On Style Leg
Used on: Pro style grills
Unplug the Grill.
With the help of another person, carefully lay the grill on its back.
Remove leg brace, if applicable.
Remove bolts securing leg to grill body.
Pull leg away from grill.
Position new leg on mounting points.
Install hardware in this order:
Bolt → washer → leg → washer → spring washer → nut
Start all fasteners loosely.
Attach leg brace.
Tighten all hardware evenly.
After Installation
Return grill to upright position (2 people required)
Confirm:
All fasteners are tight
Grill is stable and level
Reinstall any removed parts (shelf, wheels, etc.)
Still need help? If you need help replacing your part, or if you run into additional concerns after replacement, contact Traeger Support. We're ready to help 365 days a year.