Step-by-step instructions for how to replace a cooktop support bracket on your Traeger Flatrock 2-Zone grill. Includes part numbers, required tools, and estimated completion time.
Applies to:
Part #: Model: FTK0123 Flatrock 2-Zone
Pro Tip: There are 4 cooktop support brackets on the Flatrock 2 Zone, one in each corner.
Tools Needed
- Phillips Screwdriver
Estimated Time to Complete
- 10 minutes
Replacement Steps
Before Performing Any Replacement Steps:
- Turn burner knobs to OFF position, close the propane tank, and disconnect the regulator
- Remove the propane tank and set it aside
- Open the lid and remove the cooktop
- Using a Phillips screwdriver, remove the x2 screws and x2 washers from the bracket being replaced.
- Remove old support bracket.
- Place new bracket in place lining up the screw holes.
- Replace the x2 washers and x2 screws.
- Replace the cooktop.
Still need help?
If you need help replacing your part, or if you run into additional concerns after replacement, contact Traeger Support. We're ready to help 365 days a year.
If you need help replacing your part, or if you run into additional concerns after replacement, contact Traeger Support. We're ready to help 365 days a year.