Step-by-step instructions for replacing the P.A.L. rail on your Traeger IronTop 2-Burner and IronTop 4-Burner grills. Includes part numbers, required tools, and estimated completion time.
Applies to: IronTop 2-Burner | IronTop 4-Burner
Part #: Description: FTK0157 P.A.L. Rail
Tools Needed
- Phillips Screwdriver
Estimated Time to Complete
- 5 minutes
Replacement Steps
Pro Tip: Replacement steps are the same for both the folding shelf P.A.L. rail and the stationary shelf P.A.L. rail.
- Turn burner knobs to OFF position and close propane tank.
- Remove the x4 screws holding the P.A.L. rail on from inside the shelf.
- Remove P.A.L. rail.
- Place new P.A.L. rail on the shelf, lining up the screw holes.
- Attach rail from inside the shelf using the x4 screws.
Still need help?
If you need help replacing your part, or if you run into additional concerns after replacement, contact Traeger Support. We're ready to help 365 days a year.
If you need help replacing your part, or if you run into additional concerns after replacement, contact Traeger Support. We're ready to help 365 days a year.