Step-by-step instructions for how to replace the propane tank rest and propane tank wire on your Traeger IronTop 2-Burner and IronTop 4-Burner grill. Includes part number, required tools, and estimated completion time.
Applies to: IronTop 2-Burner | IronTop 4-Burner
Part #: Description: FTK0152 Propane Tank Rest FTK0158 Propane Tank Wire
Tools Needed
- Phillips Screwdriver
Estimated Time to Complete
- 5 minutes
Tank Rest Replacement Steps
Remove Old Tank Rest
Before Performing Any Replacement Steps:
- Turn burner knobs to OFF
- Close the propane tank, and disconnect the regulator
- Remove the propane tank and set it aside
- Remove the x2 screws on each side of the tank rest.
- Slide the old propane tank rest out.
Install New Propane Tank Rest
- Place the new propane tank rest on the grill and replace the x2 screws on each side.
- Place the propane tank in place and reconnect the regulator hose.
Tank Wire Replacement Steps
Before Performing Any Replacement Steps:
- Turn burner knobs to OFF
- Close the propane tank, and disconnect the regulator
- Remove the propane tank and set it aside
- Pull the wire towards the center on each side to remove it from the hole.
- Remove the old propane tank wire.
- Install the new wire by inserting the end into the hole in the grill let. Repeat on each side.
- Replace the propane tank and reconnect the regulator hose.
Still need help?
If you need help replacing your part, or if you run into additional concerns after replacement, contact Traeger Support. We're ready to help 365 days a year.
If you need help replacing your part, or if you run into additional concerns after replacement, contact Traeger Support. We're ready to help 365 days a year.