REPLACING THE TIMBERLINE P.A.L RAIL

What's in This Article?

The Pop-and-Lock (P.A.L) Accessory Rail is a versatile and unique system that will allow customers to add accessories in an easy manner--everything from hooks to a front shelf. The accessories pop on and can slide into the position a customer wants with strong magnets. This rail goes across the length of the grill and along the sides of the hopper and induction cooktop shelf.

 

Part Numbers:

  • Front Rail: KIT0647, KIT0648
  • Shelf Front Rail: KIT0703
  • Shelf Side Rail: KIT0680
  • Hopper Side Rail: KIT0679

 

HOW TO REPLACE THE ACCESSORY P.A.L RAIL

  1. Remove any attachments to the P.A.L Rail
  2. Loosen but do not remove, all 6 screws holding the P.A.L rail to the Grill
  3. Slide the P.A.L rail towards the hopper while lifting up
  4. The P.A.L rail should come off the grill
  5. Slide the new P.A.L rail into place and tighten the 6 screws holding it in.
Previous
Next
6501381185563

Was this article helpful?

0 out of 0 found this helpful