REPLACE A TIMBERLINE POWER STRIP

What's in This Article?

How to replace a power strip on a Timberline grill.

Part Number: KIT0690

 

REPLACEMENT INSTRUCTIONS

  1. Turn off and unplug the grill. 
  2. Remove the hopper access panel.
    1. Remove the 6 screws on the top and bottom of the panel and under the P.A.L rail.
  3. Remove the two screws securing the power strip to the hopper assembly.
  4. Disconnect the six connectors.
  5. Connect the six connectors to the new power strip.
  6. Screw in the two screws to attach the power strip to the hopper assembly.
  7. Reattach the hopper access panel.

 

Previous
Next
6461358837787

Was this article helpful?

0 out of 0 found this helpful