ERROR: 0002 LOW TEMP ERROR

What's in This Article?

Information on the controller error 0002: "Low Temp Error" and what to do when it happens. 

gen2-low_temp_error.jpeg

 

CAUSE

The grill is unable to climb into the cooking temperature range. This is usually due to running out of pellets.

SYMPTOMS

The grill will start a standard cooldown procedure. This ensures the grill is in a safe state.

WHAT TO DO

Safety Considerations: The internal components of the grill may still be hot after a full cooldown. Proceed with caution.

  1. Ensure the grill is cool and finished with its shutdown cycle.
  2. Check the hopper for pellets. If there are pellets, proceed to next step.
  3. Open grill and remove the grates, drip tray, and manifold to inspect the firepot. Check the firepot for ash pucks and general obstruction of the ignitor and convection air holes. If the firepot is clear, reassemble grill cavity components and proceed to the next step.
  4. Add pellets to the hopper and run the Prime Auger action from the UI. The grill is ready to cook again.
Previous
Next
6338658313371

Was this article helpful?

4 out of 8 found this helpful