HOW TO REPLACE A SILVERTON THERMOCOUPLE

What's in This Article?

This article will walk you through how to replace a thermocouple on your Silverton grill.

  1. Using a Phillips screwdriver, unscrew the 4 screws securing the Thermocouple to your grill. 
    thermoz_1.png
  2. Using a Phillips screwdriver, unscrew the 4 screws securing the controller in place. 
    thermoz_2.png
  3. Unplug the Thermocouple sensor from the controller.
    thermoz_3.png
  4. With a wrench, unscrew the screws holding the hopper to the grill.
    thermoz_4.png
  5. Carefully pull the hopper away from your grill.
    thermoz_5.png
  6. Snip the zip tie binding the Thermocouple wiring between the Hopper and the grill. 
    thermocouple_6.png
  7. Pull the Thermocouple all the way through the Hopper and the grill, and out of the grill. 
    thermocouple_7.png
  8. Feed through the new Thermocouple through the grill and through the Hopper.
    thermocouple_8.png
  9. Plug the new Thermocouple into the controller. 
    thermocouple_9.png
  10. Using a Phillips screwdriver, rescrew the controller to the grill. 
    thermocouple_10.png
  11. If available, bind the excess Thermocouple wiring with a zip tie between the Hopper and the grill.
  12. Slide the Hopper back to your grill. 
  13. Using a wrench, re-screw the grill to the Hopper.
    thermocouple_13.png
  14. Using a Phillips screwdriver, install the new Thermocouple into your grill. 
    thermocouple_14.png

If you have any questions, please contact our Customer Service

Previous
Next
4407219768987

Was this article helpful?

6 out of 10 found this helpful