Back Panel on Woodridge Elite Grill Not Fitting Properly

Occasionally the back trim panel on the Woodridge Elite grill can have a small gap. This article covers how to fix that issue.

Symptoms

When the trim panel on the back of the grill near the top is installed, there is a small gap.

Resolution

Follow the steps below to fix the gap in the back panel:

1. Loosen the 3 screws on the back of the panel (labeled A, B, C in image below)
2. Firmly press on top left corner of the panel (labeled D in image below)
3. Tighten the left screw (A) while pressing on the top left corner of the panel (D)
4. Stop pressing on the top left corner (D) and tighten the remaining 2 screws (B & C)