Motherboard Replacement Instructions - Flat Top Grill

What's in This Article?

Where is the Motherboard Located?

The motherboard is located behind a black metal plate underneath the Flatrock.

Motherboard Location.png

 

How to Replace the Motherboard on a Flat Top Grill

TOOLS NEEDED

Phillips Screwdriver

REPLACEMENT STEPS

  1. Unplug the grill from power, close the propane tank, disconnect the regulator hose.
  2. Remove the grease keg.
  3. Remove the 2 screws holding the panel shut. 
    • These screws can be removed by hand- no screwdriver needed.
      FTK19 MOTHERBOARD.gif
  4. Unscrew and remove the green ground wire.
    Ground Wire.jpg
  5. Unplug all the Molex connectors.
    FTK19 MOTHERBOARD (6).gif
  6. Remove the 2 screws from the 9V Spark Ignitor Module.
    FTK19 MOTHERBOARD (5).gif
  7. Remove the 3 screws from the corners of the motherboard and take motherboard out of plastic plate.
  8. Place new motherboard in plastic plate and screw in the 3 corner screws.
    3 Motherboard Screws.jpg
  9. Reattach 9V Spark Ignitor Module.
  10. Reconnect all Molex connections.
    FTK19 MOTHERBOARD (4).gif
  11. Reattach green grounding wire.
  12. Close panel and hand screw the 2 screws in to hold in place.
  13. Replace grease keg.
  14. Reconnect the regulator hose, turn propane on, plug flat top grill back in.

Flat Top Grill Wiring

Flatrock

Previous
Next
27085172819227

Was this article helpful?

0 out of 1 found this helpful